Brass Push In Male NPT 45° Elbow For Forged Pipe Fittings
Brass Push-In Male 45° Swivel Elbow Pipe Adapter 1554S
This hose fitting is made of brass and has a 45-degree elbow shape for connecting hose to threaded pipe conforming to the National Pipe Thread (NPT) standard at an angle. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately), and a male NPT connector on the other end connects to threaded pipe. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The fitting has a temperature range of 32 to 200 degrees F.
Typical Application:
Air systems.
Pressure:
Working pressure from vacuum to 250 psi
Vibration:
Fair resistance.
Temperature Range:
Working temperature from -40° F to +200° F(Note:see tubing manufacturer's recommendations for pressure and temperature mutations)
Material:
CA 360 Brass for Barstock fittings.CA377 Brass for forged fittings.
| PART# |
TUBE SIZE |
C |
M |
N |
| 1554S-DOT-4A |
1/4 x 1/8 |
3/8 |
.89 |
.83 |
| 1554S-DOT-4B |
1/4 x 1/4 |
3/8 |
.89 |
1.10 |
| 1554S-DOT-6A |
3/8 x 1/8 |
1/2 |
.98 |
1.07 |
| 1554S-DOT-6B |
3/8 x 1/4 |
1/2 |
.98 |
1.07 |
| 1554S-DOT-6C |
3/8 x 3/8 |
1/2 |
.98 |
1.23 |
| 1554S-DOT-8B |
1/2 x 1/4 |
5/8 |
1.15 |
1.22 |
| 1554S-DOT-8C |
1/2 x 3/8 |
5/8 |
1.15 |
1.32 |
| 1554S-DOT-8D |
1/2 x 1/2 |
5/8 |
1.16 |
1.61 |
| 1554S-DOT-10D |
5/8 x 1/2 |
11/16 |
1.21 |
1.63 |
Audited Supplier 
){kind=link}
){kind=link}