| Customization: | Available |
|---|---|
| Standard: | DIN |
| Material: | Brass |
|
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PUSH ON HOSE BARB RIGID TUBE ADAPTERPUSH ON Advantages:
Push-on Hose Fittings are machined from the highest quality brass or stainless steel.The barbs are specifically engineered to work in conjunction with the I.D.and braid angle of Push-on Hose,ensuring a tight connection without clamps.
Assembly:
Push-on Hose Fittings are designed only for use with
Push-on Hose. Do not use with any other style or
manufacturer of hose.
Assembly Instructions:
>Cut hose cleanly and squarely to length.
>Lubricate hose l.D. and barbs with light oil or soapy water.
>Push the hose onto the fitting until it bottoms against
the yellow stop ring. This ensures that all of the
barbs are engaged with the hose and will also help
keep the end of the hose from fraying.
! CAUTION: Use of clamps may damage
sealing integrity of Hose and Fitting
Temperature Range
-40°F to 180°F (-40°C to 82°C)
Limited by media through hose assembly
Typical Application:
Low pressure Air,Fuel,Lube,and Oil Lines
Material:C36000
Reference Part No:
294 - 100B-X - KA-RL - 303 - 732 - 694SPECIFICATIONS:
| PART# | HOSE I.D x O.D | M | L |
| 294-4-3 | 1/4 x 3/16 | .86 | 1.68 |
| 294-4-4 | 1/4 x 1/4 | 1.06 | 1.88 |
| 294-4-5 | 1/4x5/16 | 1.06 | 1.88 |
| 294-5-5 | 5/16x5/16 | 1.06 | 1.91 |
| 294-6-6 | 3/8x3/8 | 1.06 | 2.03 |
| 294-8-8 | 1/2x1/2 | 1.06 | 2.13 |
| 294-10-10 | 1/2x5/8 | 1.06 | 2.61 |
| 294-12-12 | 3/4x3/4 | 1.06 | 2.61 |
){kind=link}